
By Adrian Janiszewski, Senior Project Manager at MakeSpace - a housing advisory and project delivery for community, affordable and specialised housing providers
Published on October 18, 2026
Build-to-rent (BTR) developments in Australia can now access significant federal and state tax concessions, including a 4% accelerated capital works deduction and a concessional 15% managed investment trust (MIT) withholding tax rate. This is on the basis that at least 10% of dwellings are allocated to affordable housing at discounted rents. From 27 March 2026, the affordable housing compliance requirements were tightened further, and eligible community housing providers (CHPs) must now be engaged to identify affordable tenants. For community housing providers, not-for-profit housing organisations, and purpose-driven developers, understanding how the BTR model's tax and planning incentives interact with affordable housing obligations is now essential to viable project planning.
What is build-to-rent and why is it growing in Australia?
Build-to-rent is a residential development model where the developer retains ownership of all dwellings and derives income through long-term rental rather than individual unit sales. It is growing rapidly in Australia, with a record 6,000 new BTR units on track for completion in 2025, up from 4,660 in 2024 and less than 2,000 per year in prior years.
In a BTR model, income comes from stable, recurring rental yield rather than capital gains on sale. This aligns naturally with institutional investors (superannuation funds, real estate investment trusts, and sovereign wealth funds) seeking predictable, long-term income streams. The national BTR pipeline grew by more than 10,000 apartments and nearly $9 billion over the past 12 months.
The 2026 federal budget's changes to negative gearing and Capital Gains Tax (CGT) have added further momentum. By restricting negative gearing for new investors to newly built dwellings and replacing the 50% CGT discount with cost-base indexation, the budget has redirected investor attention toward yield-focused models, which BTR is built around.
For more on those changes, our blog on the 2026 federal budget and housing covers the mechanics in detail.
The sector is not without challenges. Despite record pipeline growth, 2026 BTR completions are forecast to fall back to approximately 4,000 units, and it’s feasibility, not demand, that is the defining challenge. Construction costs remain approximately 45% above pre-pandemic levels, labour constraints persist, and the affordable housing compliance requirements add modelling complexity that developers underestimate.
What are the federal tax concessions for build-to-rent?
Two federal BTR tax concessions are available from the Australian Taxation Office, both requiring at least 10% of dwellings to be allocated as affordable housing. The 4% accelerated capital works deduction and the 15% concessional MIT withholding tax rate commenced on 1 January 2025.
4% accelerated capital works deduction: Eligible BTR taxpayers can deduct 4% of construction costs annually rather than the standard 2.5%. This applies to constructions commenced after 7:30pm AEST 9 May 2023 and completed before 30 June 2030.
15% concessional MIT withholding tax rate: For foreign investors holding through a managed investment trust, the withholding rate on eligible fund payments (covering both rental income and capital gains) is 15% rather than the standard 30% for residential housing. This applies from 1 January 2025 and benefits both new and existing BTR stock brought into an eligible structure.
Eligibility requirements for both concessions:
- At least 10% of dwellings allocated as affordable housing
- Affordable dwellings rented at 74.9% or less of market rent
- Minimum 10-year BTR operation from first occupancy
- Minimum 5 years of new lease offers to tenants
The March 2026 tightening, and what changed:
From 27 March 2026, the federal BTR affordable housing requirement was tightened. Affordable dwellings must be ‘moderate or lower-income dwellings’, at least 2% must be lower-income dwellings, and tenants must be identified by an eligible community housing provider engaged by the BTR owner. If your feasibility was modelled on the pre-2026 definition, the amended requirements may change both achievable rents on the affordable cohort and operating overhead. — ATO, Build to Rent Development Tax Incentives
The amended legislative instrument (LI 2025/4, applying from 27 March 2026) also requires that where dwellings are tenanted, the tenant was identified by an eligible CHP engaged by the BTR owner to both identify prospective tenants and confirm the dwellings satisfy the criteria. This creates a formal, ongoing operational role for community housing providers in BTR projects, not just at planning, but at tenanting and compliance.
❌ The misuse tax: Where a BTR project fails to comply with requirements during the 15-year compliance period, a misuse tax applies. This is equivalent to the benefit received from the 15% rate plus an 8% penalty. The ATO Commissioner may waive this where non-compliance was due to events beyond the owner's control, provided the owner takes all reasonable steps to rectify it.
What state-level incentives support build-to-rent and affordable housing?
Most Australian states now offer land tax concessions for eligible BTR developments. These operate alongside the federal concessions, and can be stacked with federal tax benefits for qualifying projects.
Source: BDO March 2026
NSW also offers a 30% floor space ratio bonus and height bonus for BTR developments that allocate at least 15% of floor area to affordable rental housing, a planning incentive that can improve project economics alongside the land tax concession.
Most states require BTR dwellings to be made available for rent by 2030 to 2032. NSW is now a genuine alternative to Victoria for BTR development, but the tax concessions and project economics differ between the two states
How does build-to-rent connect to Victoria's planning incentives?
In Victoria, BTR developments with affordable housing components can access two additional planning levers alongside the tax concessions: Victoria's floor area uplift mechanism and the Development Facilitation Program's Clause 53.23 pathway.
Floor area uplift applies in Melbourne's Capital City Zone precincts including Southbank, Docklands, Civic, and the Western and Eastern cores. The standard base floor area ratio is 18:1. Developers can build above this by delivering public benefits worth at least 10% of the commercial value generated by the additional floor area, with affordable housing within the building an approved benefit category. However, analysis by Community Housing Industry Association Victoria (CHIA Vic) found that as of mid-2025, no affordable housing units had been built through this mechanism since its introduction in 2016. Commercial office space has been the overwhelmingly preferred benefit choice. Yet, the mechanism has potential for BTR developers willing to structure the affordable component deliberately.
Clause 53.23 of the DFP offers Ministerial planning approval for residential projects of $50M or more (metropolitan Melbourne) in approximately four months rather than the standard 12-plus months. The affordable housing threshold is 10% of dwellings (although commonly misreported as 20%). BTR's discounted rental pathway, where 10% of dwellings are rented to eligible households at no more than 30% of their gross household income, directly satisfies one of Clause 53.23's four affordable housing delivery options. This creates a natural alignment between the federal BTR concession structure and the DFP planning pathway.
For the full detail on both mechanisms, our blog on Victoria's Development Facilitation Program and floor area uplift covers the calculations, eligibility, and outcomes in full.
What are the affordable housing income thresholds and how do they affect BTR rent-setting?
In Victoria, affordable housing is defined using three income bands: Very Low, Low, and Moderate, set annually by the Governor in Council Order. The current 2025–26 thresholds for Greater Melbourne are:
Source: Governor in Council Order 2025. Lower thresholds apply in regional Victoria. The Order is updated annually; always refer to the current version for rent-setting and feasibility modelling.
Note: Any feasibility modelling using 2023 figures should be updated. Our blog on affordable housing and the Victorian planning system covers how these thresholds work within Victoria's broader planning framework.
For BTR rent-setting, the effective rent cap on affordable dwellings is the lower of: (a) 74.9% of market rent (the federal ATO requirement); and (b) 30% of the eligible household's gross income (the Victorian planning definition of affordable rent). For very low income households, the income-based cap will typically be the binding constraint; sometimes, significantly below the market-rent-based cap. Both must be modelled explicitly in feasibility.
What are the main feasibility and project challenges for BTR affordable housing?
Feasibility is the defining challenge for BTR in 2026. Many approved projects cannot proceed at acceptable returns under current construction market conditions. The affordable housing compliance layer adds further complexity.
- Construction cost pressure: Costs remain approximately 45% above pre-pandemic levels; average build time has extended from 6.4 months a decade ago to 10.4 months today; and labour productivity in dwelling construction has declined 12% over the past 30 years. These pressures affect all residential development, and BTR is not immune.
- Compliance adds modelling complexity: The affordable housing requirements are not optional for federal concessions. The post-March 2026 tightening (CHP engagement for tenant identification, 2% lower-income dwelling minimum) adds operational overhead that must be modelled from day one, not treated as a handover issue. Developers who factored in the simpler pre-2026 definition need to revisit their feasibility assumptions.
- The rent-return tension: The affordable cohort's rental yield is constrained by both the 74.9% market rent cap and the income-based rent limit. For projects targeting very low income households, the affordable component may generate substantially below-market revenue. This affects the blended yield across the whole development and needs to be stress-tested across different income band allocations in the project mix.
- The CHP partnership: from 27 March 2026, CHPs must be formally engaged by BTR owners to identify affordable tenants. For developers who have not previously worked with CHPs, establishing these relationships at the feasibility stage is essential for both compliance planning and operational readiness. The CHP's role is now a compliance condition.
How MakeSpace supports BTR and affordable housing projects
BTR with an affordable housing component is one of the most structurally complex forms of residential development in Australia right now. It requires federal tax compliance, state planning incentives, CHP partnerships, income-tested rent structures, construction oversight, and project governance all working together from the outset.
MakeSpace works with community housing providers (CHPs), not-for-profit housing organisations, and purpose-driven developers on affordable housing projects including BTR, from early feasibility and planning strategy through to procurement, construction oversight, and handover. The most consequential decisions in a BTR project are made before capital is committed: apartment mix, affordable housing allocation, planning pathway, CHP engagement structure, and compliance modelling. Getting these right at feasibility is where experienced housing advisors make the most practical difference.
If your organisation is assessing the viability of a BTR project with an affordable housing component, or working through the planning and project considerations for an existing program, do reach out.
Frequently Asked Questions (FAQs)
What is build-to-rent and how does the BTR model work in Australia?
Build-to-rent is a residential development model where a single owner retains all dwellings and generates income through ongoing rental yields rather than unit sales. In Australia, approximately 6,000 new BTR units are forecast for completion in 2025 (more than triple the annual average of prior years) supported by federal tax concessions from January 2025 and state land tax incentives across Victoria, NSW, Queensland, and Western Australia. Despite strong demand, completions are expected to slow to around 4,000 units in 2026 due to construction cost pressures and the complexity of meeting affordable housing compliance requirements.
What affordable housing requirements apply to the federal BTR tax concessions?
To access the 4% capital works deduction and 15% MIT withholding rate, at least 10% of BTR dwellings must be allocated as affordable housing at rents of 74.9% or less of market value. From 27 March 2026, affordable dwellings must also be moderate or lower-income dwellings, at least 2% must be lower-income, and eligible tenants must be identified by a community housing provider formally engaged by the BTR owner. Failure to maintain compliance during the 15-year compliance period triggers a misuse tax equivalent to the tax benefit received plus an 8% penalty.
How does the BTR affordable housing rent requirement interact with Victorian income thresholds?
For BTR projects in Victoria, the effective rent cap on affordable dwellings is the lower of two constraints: the federal ATO requirement of 74.9% of market rent, and the Victorian planning definition of affordable rent at 30% of the eligible household's gross income. For lower-income households, the income-based cap is typically the binding constraint, often well below the market-rent cap. Projects must model both limits across the full range of household types in the intended affordable cohort. The income thresholds are set annually by the Governor in Council Order; the 2025–26 Order sets the moderate income cap for a single adult in Greater Melbourne at $74,080.
Can a BTR project access both the federal BTR concessions and Victoria's Development Facilitation Program?
Yes, provided it meets the eligibility criteria for each independently. For Clause 53.23 of the DFP, the project needs a $50M or more construction cost (metropolitan Melbourne) and must include at least 10% of dwellings as affordable housing, not 20% despite common misreporting. BTR's discounted rental pathway, where 10% of dwellings are rented to eligible households at no more than 30% of gross household income, directly satisfies one of Clause 53.23's four affordable housing delivery options. A qualifying BTR project in Victoria can simultaneously access the federal capital works deduction, the MIT withholding concession, the state land tax concession, and the DFP planning pathway.
Sources: ATO — Build to Rent Development Tax Incentives; JWS Lawyers — Revised BTR Tax Concessions; Feasly — BTR Australia Developer Guide; Knight Frank BTR Update Q3 2025 via Property Update; BDO — Australian Housing Landscape, March 2026; API Magazine — The Real Test for BTR Arrives in 2026, December 2025; Altus Group — Australia's BTR Staying Power, November 2025; Governor in Council Order 2025; Deloitte — New year, same challenges for Australia's housing market, January 2025
Last updated on October 18, 2026
Get in touch
Ready to deliver housing that makes a real difference? We'd love to discuss your project.
.jpg)



.webp)
.webp)
.webp)
%20(1).webp)
.webp)









